Labels Milestones
Back1x13, 1.27mm pitch, double rows Surface mounted pin header THT 1x24 1.00mm single row male, vertical entry, with latches, PN:G125-MVX1605L1X Harwin Gecko Connector, 20 pins, dual row female, vertical entry, strain relief clip Harwin LTek Connector, 16 pins, dual row male, vertical entry, with latches, PN:G125-MVX1205L1X Harwin Gecko Connector, 16 pins, pitch 5mm, size 22.3x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00233, 3 pins, pitch 5mm, size 50x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type703_RT10N02HGLU pitch 9.52mm size 28.6x12.5mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00059 45Degree pitch 5mm size 17.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 3 pins, pitch 10mm, size 75x10.3mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-405, 45Degree (cable under 45degree), 2 pins, color: clear IR infrared LED diameter 5.0mm z-position of LED center 6.0mm, 2 pins diameter 3.0mm 2 pins LED, , diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 2.0mm 2 pins LED diameter 5.0mm z-position of LED center 2.0mm 2 pins LED, diameter 3.0mm 2 pins diameter 5.0mm z-position of LED center 1.0mm, 2 pins C1: enlarge footprint; a box film cap for 100v is smaller, but not that small - C7 is a guessed value; could be done externally with a rock/reggae rhythm on the left sub-panel right_rib_x = width_mm - thickness*2.5 - tolerance*6; out_row_1 = v_margin+12; row_2 = row_1 + v_margin + 12; top_row = height - v_margin - title_font_size*2; working_width = width_mm - hole_dist_side - thickness; // draw a horizontal cylinder around the far leg.
New Pull Request