3
1
Back

Placement fm_in = [input_column + h_margin/2, bottom_row, 0]; pwm_duty = [second_col, third_row, 0]; fm_in = [first_col, first_row, 0]; c_tune = [width_mm/2, top_row, 0]; left_rib_x = hole_dist_side + thickness; v_margin = hole_dist_top*2; left_rib_x = thickness + 9.5/2 + tolerance*2; //three knobs plus space between them right_panel_width = width_mm - thickness*2; // How much horizontal space needed for left-hand and right-hand sub-panels left_panel_width = 16.5+16.5+10.5; //two knob, one jack, plus space between two resistors Properly assign potentiometer pads and thermal vias; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf TDFN, 6 Pin (http://www.ti.com/lit/ds/symlink/tps61040.pdf#page=35), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 5 times 0.25 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 2.3mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310591_RT063xxHBWC_OFF-022684T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-15-3.5-H pitch 3.5mm size 7x6.5mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-5-5.08, 5 pins, pitch 10mm, size 25x9mm^2, drill diamater 1.5mm, 2 pads, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00015 pitch 5mm Varistor, diameter 9mm, width 5.5mm, pitch 5mm size 40x12.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-13-5.08 pitch 5.08mm 1W length 9.9mm diameter 3.6mm Resistor, Axial_DIN0411 series, Axial, Vertical, pin pitch=5.08mm, 1.5W, length*diameter=14.3*5.7mm^2 Resistor Axial_DIN0614 series Axial Vertical pin pitch 27.50mm length 29mm diameter 10mm Fastron 77A Inductor, Axial.

New Pull Request