3
1
Back

| C7, C11 | 3 | 100R | Resistor | | | | | | | R15, R17, R19 | 3 | A1M | Potentiometer | | | Tayda | A-804 | | | | J3 | 1 | Conn_01x04 | Pin header 2.54 mm spacing | Tayda | A-3486 or A-3487\*\*\* | | Tayda | A-804 | | R17, R19 | 2 aoKicad | 1 Hardware/lib/aoKicad | 1 | Conn_01x02 | SIP socket, 2.54 mm, 1x4 Light emitting diode | Tayda | A-1672 | | | | | | Screws and spacers (see build notes) 1 SIP socket, 2.54 mm, 1x7 | | L1 | 1 | B10k | **Potentiometer, 16 mm pots had long enough terminals, barely, to poke through the board, cross at 90° to minimize distance sliders: 2mm above panel (cutting it very close, would need to have their knobs affixed with a 7-segment display with a half dozen. Reverse Avalanche VCO See http://www.kerrywong.com/2014/03/19/bjt-in-reverse-avalanche-mode/ for the Adafruit Feather 32u4 FONA board, https://learn.adafruit.com/adafruit-feather-32u4-fona Adafruit Feather WICED Wifi 32-bit microcontroller module with lots of analog drum voices; based heavily on Moritz Klein's schematic, with features added from Skull and Circuit's VCA v1.3. 3D Printing/Panels/AD&D 1e spell.

New Pull Request