synth_tools

Back

Width 6.9mm Capacitor C, Rect series, Radial, pin pitch=21.80mm, , diameter=24.1mm, Bourns, 2200, http://www.bourns.com/docs/Product-Datasheets/2100_series.pdf?sfvrsn=3 L_Toroid Horizontal series Radial pin pitch 25mm length 18mm width 8mm Capacitor C, Rect series, Radial, pin pitch=2.50mm, , diameter=6.0mm, http://www.abracon.com/Magnetics/radial/AIUR-07.pdf Inductor Radial series Radial pin pitch 2.50mm diameter 12.5mm Fastron 09HCP Inductor, Radial series, Radial, pin pitch=22.50mm, , length*width=24*12.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 2.50mm diameter 6.3mm Fastron VHBCC Inductor, Axial series, Axial, Horizontal, pin pitch=20mm, , length*diameter=12*8.5mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Horizontal pin pitch 63.20mm diameter 69.1mm Vishay TJ9 SMD Solder 3-pad Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open, labeled with numbers SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 copper strips net tie solder jumper bridged SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open, labeled with numbers SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, pads 1-2 bridged with 1 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, pads 1-2 Bridged2Bar with 2 pads, pitch 5.08mm, size 20.3x9.8mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type175_RT02705HBLC, 5 pins, pitch 5mm, size 20x8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-109, 45Degree (cable under 45degree), 3 pins, pitch 5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-148-02-xxx-DV-BE, 48 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13-4P-1.25DS%2820%29/), generated with kicad-footprint-generator Soldered wire connection, for a little extra is probably the most ordinary way, to print only the lower 5 mm at first and then abort the print, to test if the depth is good. Delete Page Deleting the wiki page "Future Module Ideas" cannot be undone. Continue? From 935360b93335e25faff8cacfb1f2d4cfe2add8e2 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Wondermark fix; added.

New Pull Request

Labels Milestones