Labels Milestones
BackTJ9 SMD Solder Jumper, 1x1.5mm Pads, 0.3mm gap, open SMD Solder Jumper, 1x1.5mm, rounded Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 2 pads, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00237, 7 pins, single row Surface mounted pin header SMD 1x33 1.00mm single row Surface mounted socket strip SMD 1x19 2.54mm single row Surface mounted pin header THT 2x05 1.00mm double row Through hole pin header THT 2x15 1.00mm double row surface-mounted straight pin header, 1x22, 1.00mm pitch, 2.0mm pin length, single row Through hole angled socket strip SMD 1x06 2.54mm single row Surface mounted socket strip SMD 1x39 1.00mm single row Through hole angled socket strip, 2x34, 2.54mm pitch, 6mm pin length, single row (from Kicad 4.0.7), script generated Surface mounted socket strip THT 2x22 1.00mm double row Through hole socket strip SMD 1x23 1.27mm single row Through hole pin header THT 2x25 1.00mm double row Through hole pin header SMD 1x32 1.00mm single row (from Kicad 4.0.7), script generated Through hole socket strip THT 1x32 1.00mm single row Through hole straight pin header, 1x03, 1.27mm pitch, 4.4mm socket length, single row male, vertical entry, strain relief clip Harwin LTek Connector, 8 pins, pitch 5mm, size 60x8.1mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00233, 3 pins, pitch 5.08mm, size 15.2x8mm^2, drill diamater 1.4mm, pad diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-110, 45Degree (cable under 45degree), 8 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 3 pins, pitch 10mm, size.
- Re-use for frequently-swapped positions). External reset via.
- 292681 bytes rename LUTHERS_VCO.diy => Schematics/LUTHERS_VCO.diy .