synth_tools

Back

1.00mm pitch (http://www.st.com/resource/en/datasheet/viper01.pdf SSOP 3.9 4.9 1.00 SSOP14: plastic shrink small outline package http://www.ti.com/lit/ds/symlink/drv8301.pdf HVSSOP, 10 Pin (https://www.ti.com/lit/ds/symlink/tmp461.pdf#page=35 (RUN0010A)), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP44: plastic thin shrink small outline 7,5mm long https://toshiba.semicon-storage.com/info/docget.jsp?did=53548&prodName=TLP2770 6-Lead Plastic Dual Flat No Lead Package (UC) - 3x3x0.5 mm Body [QFN] with corner pads and thermal vias; see figure 8.2 of https://www.silabs.com/documents/public/data-sheets/efm8bb1-datasheet.pdf TDFN, 6 Pin (http://www.onsemi.com/pub/Collateral/NCP133-D.PDF), generated with kicad-footprint-generator connector wire 1sqmm strain-relief Soldered wire connection with feed through strain relief, for 2 times 0.127 mm² wires, reinforced insulation, conductor diameter 0.65mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00004, 5 pins, pitch 3.5mm, size 46.5x8.3mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-4, 4 pins, pitch 10mm, size 115x9mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-3 pitch 5mm size 81.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-405 45Degree pitch 5mm size 15x12.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-9-5.08, 9 pins, pitch 3.5mm, size 17.5x6.5mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00303, 7 pins, pitch 5mm, size 10x9.8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Philmore pitch 5mm size 22.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 24 pins.

New Pull Request

Labels Milestones