synth_tools

Back

Called a "Baby 8", so called because it's a 5-roll, a 5-roll, I think this is actually a pushbutton momentary, but roughly same dimensions as toggle switch ON-ON | | | S1 | 1 | SW_Push | Push button switch, normally open, two pins, 45° tilted D Momentary Switch, dual pole double throw, separate symbols | | Tayda | A-805 | | | J12 | 1 | 2_pin_Molex_header | KK254 Molex connector 2.54 mm spacing | Tayda | A-3486 or A-3487\*\*\* | | C2, C5, C6, C8, C9 | 5 | 100nF | Unpolarized capacitor | | | | | | | R14, R15, R18 | 3 | A1M | Potentiometer | | Tayda | A-826 | | | R16, R18, R26 | 3 | A1M | Potentiometer | | J2 | 1 From 676d1403e60ef90e437a7e3e627a7211b04b0bb8 Mon Sep 17 00:00:00 2001 Subject: [PATCH] Update README.md 2cb8e5eaf679e30139948d8744800b04487466fc updated C5 footprint & tracing; schematic annotation update with full threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj6hh-au Slim Jacks, 6.35mm (1/4in) jack receptacle, vertical pcb mount, replaces NL4MD-V-2, https://www.neutrik.com/en/product/nl4mdxx-v-2 speakON Chassis Connectors, 4 pole chassis connector, grey D-size flange, switchable version of bornier4 simple 5-pin terminal block, pitch 5.08mm, size 25.4x10.6mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-10-3.5-H pitch 3.5mm size 46.2x7mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 804-124, 45Degree (cable under 45degree), 2 pins, pitch 10mm, size 85x10.3mm^2, drill diamater 1.2mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 1.5 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex PicoBlade Connector System, 5268-04A, 4 Pins (http://www.molex.com/pdm_docs/sd/559320210_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 6 times 0.15 mm² wire, reinforced insulation, conductor diameter 2.4mm, see http://www.philmore-datak.com/mc/Page%20197.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00060, 45Degree (cable under 45degree), 3 pins, pitch 7.5mm, size 62.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 1.5mm (loose fit), length 10.0mm solder Pin_ diameter 1.3mm, wire diameter 0.8mm wire loop as test Point, diameter 2.5mm Resistor, Axial_DIN0207 series, Axial, Vertical.

New Pull Request

Labels Milestones