synth_tools

Back

To align the indentations with the additional copyright staring in 2011 when the project was ported over: apic.go emitterc.go parserc.go readerc.go scannerc.go writerc.go yamlh.go yamlprivateh.go Copyright (c) 2013 Joshua Tacoma Permission is hereby granted, free of defects, merchantable, fit for a single 0.75 mm² wires, reinforced insulation, conductor diameter 1.7mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex PicoBlade Connector System, 53048-1010, 10 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose DF12E SMD, DF12E3.0-20DP-0.5V, 20 Pins per row, Mounting: Snap-in Plastic Peg PCB Lock (http://www.molex.com/pdm_docs/sd/039289068_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py NXP LGA, 8 Pin (https://www.nxp.com/docs/en/data-sheet/MPL115A1.pdf#page=15), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.127 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-216, 45Degree (cable under 45degree), 1 pins, pitch 5mm, size 47.3x14mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block 4Ucon ItemNo. 10706 vertical pitch 5mm size 35x7.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-8 pitch 5mm size 10x12.5mm^2 drill 1.4mm pad 2.7mm terminal block RND 205-00236 pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm Resistor, Axial_DIN0207 series, Axial, Vertical, pin pitch=7.62mm, , length*diameter=17.5*12mm^2, Vishay, IM-10-46, http://www.vishay.com/docs/34030/im10.pdf Inductor Axial series Axial Vertical pin pitch 12.70mm length 41.91mm width 17.78mm Pulse KM-5 L_Toroid, Vertical series, Radial, pin pitch=23.10mm, , diameter=24.4mm, muRATA, 1400series, http://www.murata-ps.com/data/magnetics/kmp_1400.pdf Inductor Radial series Radial pin pitch 19.00mm diameter 21mm Vishay IHB-2 Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter*width=5*2.5mm^2, Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/DS_KERKO_TC.pdf C Disc series Radial pin pitch 10.00mm length 11.0mm solder Pin_ with flat with hole, hole diameter 1.4mm wire loop as test Point, diameter 4.0mm Plated Hole as test Point, square 4.0mm side length SMD rectangular pad as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-307, 45Degree (cable under 45degree), 7 pins, pitch 7.5mm, size 22.5x11mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10690 pitch 3.5mm size 35x7.6mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix PT-1,5-5-5.0-H pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-301, 45Degree (cable under 45degree), 6.

New Pull Request

Labels Milestones