synth_tools

Back

Cap instead of A4 Updates from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3faah1-0 AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3fav1 A Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel. Possibly do as an addendum to the wide range of in-tune response, but comments discuss potential fixes, maybe worth it for a single 0.5 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 2.1mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00232_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-509 45Degree pitch 7.5mm size 45x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-14 pitch 5mm size 15x9.8mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type175_RT02704HBLC, 4 pins, pitch 10mm, size 85x9mm^2, drill diamater 1.3mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00022, 12 pins, pitch 2.54mm, size 23.32x6.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-101 45Degree pitch 5mm size 40x12.6mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10706, vertical (cable from top), 4 pins, pitch 2.5mm, size 17.2x10mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00293 pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm Resistor, Axial_DIN0207 series, Axial, Horizontal, pin pitch=25mm, , length*diameter=17*7.0mm^2, http://cdn-reichelt.de/documents/datenblatt/B300/STYROFLEX.pdf C Axial series Axial Horizontal pin pitch 37.50mm length 41.5mm width 31mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , diameter=30mm, Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf CP Axial series Axial Horizontal.

New Pull Request

Labels Milestones