Labels Milestones
BackWidth 6.2mm, pitch 7.5mm size 182x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-516, 45Degree (cable under 45degree), 9 pins, pitch 6.35mm, hole diameter 1.3mm, wire diameter 0.5mm test point wire loop wire loop as test point, loop diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10693, vertical (cable from top), 10 pins, dual row male, vertical entry, strain relief clip Harwin LTek Connector, 7 pins, pitch 10mm, size 75x10.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-2-5.08, 2 pins, diameter 5.0mm z-position of LED center 4.9mm, 2 pins LED, Round, FlatTop, diameter 5.0mm, 4 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-416 45Degree pitch 7.5mm size 37.5x10.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00086, vertical (cable from top), 2 pins, diameter 5.0mm THT rectangular pad as test point, loop diameter2.6mm, hole diameter 1.3mm, wire diameter 1.0mm (press fit), length 10.0mm solder Pin_ diameter.
New Pull Request