synth_tools

Back

Panel-mountable BNC connector mounted through PCB, vertical BNC RF interface bayonet 50ohm BNC female PCB mount 4 pin, 0.5mm square SMD pads Net tie, 2 pin, 1.0mm round THT pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 4 pin, 0.5mm square SMD pads Net tie, 4 pin, 1.0mm round THT pads Laser Gaming Sensor ADNS-9800 Fiberoptic Transmitter TX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN Fiberoptic Receiver RX, HFBR series (https://docs.broadcom.com/docs/AV02-3283EN TSL2550 ambient light sensor Fiber Optic Transmitter and Receiver ambient light sensor, https://www.kingbright.com/attachments/file/psearch/000/00/00/KPS-3227SP1C(Ver.16).pdf KPS-3227 Ambient Light Photo Sensor KPS-5130 photodiode RGB sensor Subminiature Reflective Optical Sensor Photointerrupter infrared LED diameter 10.0mm 2 pins Rectangular size 4.0x2.8mm^2 diameter 2.0mm, 2 pins diameter 5.0mm z-position of LED center 1.6mm, 2 pins diameter 5.0mm 3 pins UFQFPN 20-lead, 3 x 6mm drills 3 pin Molex header 2.54 mm spacing Pin header 2.54 mm spacing Pin header 2.54 mm spacing | | U2 | 1 README.md | 5 create mode 100644 Hardware/PCB/precadsr/Kosmo_panel.pretty/fastestenv_Panel_Dual_Mounting_Holes.kicad_mod delete mode 100644 Hardware/PCB/precadsr/ao_tht.pretty/Power_Header.kicad_mod delete mode 100644 Schematics/Unseen Servant/fp-info-cache glide in (sleeve and normal both GND Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) - Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular, Rectangular, Rectangular size 4.5x1.6mm^2, 2 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-10-2.54 pitch 2.54mm DCDC-Converter, RECOM, RECOM_R-78B-2.0, SIP-3, pitch 2.54mm, hole diameter 1.3mm, length 10.0mm, width 3.5mm, pitch 5mm size 21.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-609, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 10x8mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type055_RT01503HDWU, 3 pins, pitch 2.5mm, size 12.2x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-10-5.0-H pitch 5mm size 35x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00048, 5 pins, pitch 5mm, size 61.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-601, 45Degree (cable under 45degree), 2 pins, diameter 5.0mm 2 pins Rectangular size 4.5x1.6mm^2 2 pins black IR-LED, diameter 3.0mm, 2 pins Rectangular size 5.0x2.0mm^2, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-819EGW(Ver.14A).pdf LED diameter 3.0mm z-position of LED center 2.0mm, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-144GDT(Ver.14B).pdf LED_Rectangular Rectangular Rectangular size 3.9x1.8mm^2 2 pins LED.

New Pull Request

Labels Milestones