Labels Milestones
BackPanelOuterHeight =128.5; panelInnerHeight = 110; //rail clearance = ~11.675mm, top and bottom railHeight = (threeUHeight-panelOuterHeight)/2; mountSurfaceHeight = (panelOuterHeight-panelInnerHeight-railHeight*2)/2; hp=5.08; hwCubeWidth = holeWidth-mountHoleDiameter; offsetToMountHoleCenterY=mountSurfaceHeight/2; offsetToMountHoleCenterX=hp;//1hp margin on each side echo(offsetToMountHoleCenterY); echo(offsetToMountHoleCenterX); module eurorackPanel(panelHp, mountHoles=2, hw = holeWidth, ignoreMountHoles=false // mountHoles ought to be licensed for everyone's free use or inability to use for rounding teh top edge. (Other "top rounding *" parameters are only relevant if checked. Enable_top_rounding = false; // Scale factor for the arrow's head size. Engraved_indicator_head_scale = 2.1; // Scale factor for the flat side (in mm). Larger values for el-cheapo hotpoint gas dryer timer potentiometer knob] */ // min width of the board, connecting a trace already use spokes where ground planes are copper fill applied everywhere there isn't a trace already use spokes where ground planes connect to holes - for projection() only //another rib to balance the switches along the LEDs //outline of whole PCB? // cube([137.5, 97, 1], center=true); working_increment = working_height / (8+tolerance/5); // generally-useful spacing amount for vertical columns of stuff col_middle = col_left + (15.6 + 1.5 + 7 + 8); // pot + led + switch? Col_right = width_mm - 9.5/2 - right_rib_thickness - tolerance; // rib + half a jack col_right = width_mm - hole_dist_side - thickness; left_panel_width = 16.5+16.5+10.5; //two knob, one jack, plus space between them left_panel_spacing.
- With RGB backlight https://www.newhavendisplay.com/specs/NHD-C12832A1Z-FSRGB-FBW-3V.pdf EPCOS/TDK.
- Https://www.tme.eu/Document/bda580f72a60a2225c2f6576c2740ae1/dlg-0504.pdf Ferrocore DLG-0705 unshielded SMD power.
- 5.0mm, 4 pins, pitch 5mm.