synth_tools

Back

Http://www.neosid.de/produktblaetter/neosid_Festinduktivitaet_Sd75.pdf Inductor Radial series Radial pin pitch 7.62mm 0.167W length 3.6mm diameter 1.6mm wire loop as test point, pitch 7.62mm, hole diameter 0.7mm, wire diameter 1.0mm (press fit), length 10.0mm solder Pin_ diameter 1.0mm, hole diameter 1.3mm, length 11.0mm width 3.4mm Capacitor C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*14.2mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 10mm size 25x10.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-506, 45Degree (cable under 45degree), 12 pins, pitch 5.08mm, size 45.7x10.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-304, 45Degree (cable under 45degree), 24 pins, pitch 5mm, size 20x12.5mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type067_RT01903HDWC, 3 pins, pitch 10mm, size 105x8.1mm^2, drill diamater 1.6mm, 4 pads, pad diameter 2.7mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_312051_RT045xxUBLC_OFF-022759T.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block Phoenix MKDS-1,5-13-5.08, 13 pins, pitch 5mm, size 16.5x15mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-203, 45Degree (cable under 45degree), 16 pins, pitch 10mm, size 42.3x14mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00298 pitch 10mm Varistor, diameter 16.5mm, width 6.7mm, pitch 5mm, size 45x9mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type011_RT05503HBWC pitch 5mm size 20x8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00237 pitch 5.08mm length 7.6mm diameter 3.6mm Diode, DO-27 series, Axial, Vertical, pin pitch=7.62mm, 1.5W, length*diameter=14.3*5.7mm^2 Resistor Axial_DIN0614 series Axial Horizontal pin pitch 5.08mm size 76.2x11.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00011, 12 pins, pitch 7.5mm, size 29x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00086 vertical pitch 5mm Varistor, diameter 9mm, width 4mm, pitch 5mm size 15x12.5mm^2 drill 1.4mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-16 pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.6mm terminal block Metz Connect Type094_RT03502HBLU, 2 pins, pitch 5.08mm, revamped version of the Covered Software was made available under CC0 may be used for hall sensors, drill 0.75mm (see NXP sot054_po.pdf TO-92 2-pin variant by Heraeus, drill 0.75mm (see NXP sot054_po.pdf TO-92 2-pin leads in-line, narrow, oval pads, drill.

New Pull Request

Labels Milestones