Labels Milestones
Back236-408, 45Degree (cable under 45degree), 5 pins, pitch 10.2mm, size 96.5x8.3mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-108, 45Degree (cable under 45degree), 12 pins, pitch 3.81mm, size 15.1x7.3mm^2, drill diamater 1.1mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00298, 2 pins, diameter 5.0mm 2 pins diameter 3.0mm z-position of LED center 3.0mm 2 pins LED, diameter 4.0mm, hole diameter 0.7mm THT pad as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 1.1mm, length 10.2mm, width 3.5mm Capacitor C, Rect series, Radial, pin pitch=15.75mm, , diameter=21mm, http://www.abracon.com/Magnetics/radial/AIRD02.pdf Inductor Radial series Radial pin pitch 10.00mm diameter 18mm Inductor, Radial series, Radial, pin pitch=7.50mm, , diameter=12.5mm, Electrolytic Capacitor CP Radial series Radial pin pitch = 34.93mm, http://www.vishay.com/docs/30217/cpsl.pdf Resistor Axial_Shunt series Box pin pitch 5.08mm length 5.2mm diameter 2.7mm Diode, A-405 series, Axial, Vertical, pin pitch=2.54mm, 0.25W = 1/4W length 6.3mm diameter 2.5mm wire loop as test Point, square 4.0mm side length, hole diameter 1.2mm (loose fit), length 10.0mm solder Pin_ with flat fork, hole diameter 2.0mm SMD pad as test Point, diameter 1.5mm wire loop with bead as test Point, square 1.5mm side length test point plated hole Plated Hole as test Point, square 3.0mm side length, hole diameter.
- D1, D2, D3, D4, D5, D8.
- B3B-PH-K (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py.
- 1.41 2.576 (end 1.37 2.578 (end 1.33 -1.27.