Labels Milestones
BackLength*width=16.5*7mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 12.7mm length 9mm diameter 8mm Electrolytic Capacitor CP, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/DO-41%20(Plastic).pdf Diode DO-41_SOD81 series Axial Vertical pin pitch = 25.40mm, http://www.vishay.com/docs/30217/cpsl.pdf Resistor Axial_Shunt series Box pin pitch 35mm length 29mm width 13mm Capacitor C, Rect series, Radial, pin pitch=27.50mm, , length*width=29*7.9mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 2.50mm diameter 5.0mm 2 pins diameter 5.0mm z-position of LED center 1.0mm 2 pins diameter 3.0mm z-position of LED center 9.0mm 2 pins C1: enlarge footprint; a box film cap instead of A4 d8eca8dc7e Add note resulting from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3faav2-0 AA Series, 3 pole male XLR receptacle, grounding: without ground/shell contact, vertical PCB mount, retention spring, https://www.neutrik.com/en/product/ncj10fi-v AA Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, lateral left PCB mount, retention spring instead of the plastic walls. Clf_wall = 2; panelHp=6; holeCount=4; holeWidth = 5.08; // 5.08, must explicitly account for squishing width = 10; knob_radius_bottom = 10; label_font = 6; //knob_radius saw_out = [output_column, row_2, 0]; fm_in = [input_column - h_margin/2, row_1, 0]; square_out = [output_column, row_2, 0]; audio_in_2 = [left_col, row_2, 0]; pwm_in = [input_column + h_margin/2, row_1, 0]; fm_in = [h_margin+working_width/8, row_2, 0]; audio_in_2 = [left_col, row_6, 0]; cv_1b_atten = [right_col, row_3, 0]; manual_2 = [left_col, row_2, 0]; fm_lvl = [h_margin+working_width/8, row_3, 0]; manual_2 = [left_col, row_3, 0]; left_rib_x = thickness * 1; //right_rib_x = width_mm - right_rib_thickness; Panels/10_step_seq_38hp_v3.2.scad Normal file Unescape Hardware/PCB/precadsr/ao_tht.pretty/D_DO-35_SOD27_P7.62mm_Horizontal.kicad_mod Normal file Unescape Docs for installation and contributing. D40f7ca1ca Experimenting with more representative footprints. Consider moving C11 so it does not arrive in a narrow space between them //left_panel_spacing = left_panel_width / 3 + tolerance*8; right_panel_width = width_mm - thickness*2; // How much horizontal space needed for left-hand and right-hand sub-panels left_panel_width = 16.5+16.5+10.5; //two knob, one jack, plus space for everything, lining things up more .../Unseen Servant/Unseen Servant.kicad_sch | 4 Hardware/PCB/precadsr/precadsr.sch | 1867 Hardware/PCB/precadsr/precadsr.xml | 1656 create mode 100644 Hardware/Panel/precadsr-panel/precadsr-panel.pro create mode 100644 3D Printing/Panels/Radio_shaek_standoff_thick.stl create mode 100644 Hardware/PCB/precadsr/Kosmo_panel.pretty/Kosmo_Pot_Hole_NPTH.kicad_mod create mode 100644 Schematics/SynthMages.pretty/SOCKET_2_PIN_Header.kicad_mod create mode 100644.