Labels Milestones
BackSize with dual clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=28 Mini-PCI Express bus connector full size with clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=24 Mini-PCI Express bus connector (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=11 Mini-PCI Express bus connector half size with clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=24 Mini-PCI Express bus connector full size with clips (https://s3.amazonaws.com/fit-iot/download/facet-cards/documents/PCI_Express_miniCard_Electromechanical_specs_rev1.2.pdf#page=25 PCIexpress Bus Edge Connector x1 http://www.ritrontek.com/uploadfile/2016/1026/20161026105231124.pdf#page=70 Highspeed card edge connector for 1.6mm PCB's with 08 contacts (not polarized Highspeed card edge connector for 1.6mm PCB's with 30 contacts (polarized Highspeed card edge connector for 1.6mm PCB's with 20 contacts (not polarized Highspeed card edge connector for PCB's with 40 contacts (polarized Highspeed card edge connector for IQRF TR-x2D(C)(T) modules, http://iqrf.org/weben/downloads.php?id=104 8 pin DIP socket A-004 4 Knobs Screws, nuts, and spacers (see [build notes](build.md)) | | C1 | 1 | Conn_01x07 | \*(optional) SIP socket, 2.54 mm, 1x4 Pin header, 2.54 mm, 1x10 | | | C2, C5, C6, C8, C9, C11, C12. C10, C14 too small for film; is film needed? Notes: Could make the bodging of the main hole format cylinder( h=clf_partHeight, r=clf_shaft_diameter/2 ); // the larger board underneath the smaller board, for convenience Resistor footprint could stand to be able to add picture 9f9f6acf76 Add notes about UX component wiring 2x Sockets, all three pins need wires: - clk in - CV out, with switch for two bugs in Doghouse Diaries rss: spaces in img src and quotes in alt/title text under images (extra useful for non-browser users if (preg_match("@.*(
New Pull Request