Labels Milestones
Back// overall 3u height offsetToMountHoleCenterX=hp;//1hp margin on each side module eurorackPanel(panelHp, mountHoles=2, hw = holeWidth, ignoreMountHoles=false module eurorackMountHoles(php, holes, hw) { holes = holes-holes%2;// mountHoles ought to be able to add picture 5082711a98 Add a horizontal wall (across the panel } // Two Lumps Features already done: Internal clock with manual control. - Clock Rate - variable resist +6k between U2-8 and U2-9 Reset Sw - when pressed, short +12V and Reset In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off - Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins Rectangular size 4.5x1.6mm^2 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2, 3 pins, pitch 5mm, size 60x10mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 10693 vertical pitch 3.5mm size 35x7.6mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-14-3.5-H, 14 pins, pitch 2.54mm, size 20.78x6.5mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-9-3.5-H pitch 3.5mm size 29x8.3mm^2 drill 1.3mm pad 2.5mm terminal block connector Terminal Block WAGO 236-102, 45Degree (cable under 45degree), 5 pins, pitch 7.5mm, size 75x10.3mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-15, 15 pins, pitch 10mm, size 95x9mm^2, drill diamater 1.3mm, pad diameter.
- -7.38374 5.12136 3.82299 facet normal -6.353877e-001 7.721933e-001 0.000000e+000.
- When off, more like 1M when off.