Labels Milestones
BackFront Don't put R8 so close to R26 - D36/R47 too close - Trim 5mm from vertical for both panels, to make fitting inside a case easier. Or 10mm if it can fit; losing the bodge area. Assembly Tests: Glide In - diode to U2-3 Clock In - U1-13 (can get at from top when assembled Stop Switch - 10 ohms between U1-14 and U2-1 when off, more like 1M ohms when off - Single Step - 12V through 10k Ohms to U-1-14, more like 1M ohms when off Single Step - 12V through 10k Ohms to U-1-14, more like 1M when off Glide In - U1-13 (can get at from top when assembled - Stop Switch - 10 LEDs - 6 sockets - One potentiometer per step, to set clock rate (if onboard clock is used) (rv11 // once/continuous (switch // once/continuous (switch // once/continuous (switch // cv out (j7/j6 // pause (j18/j19 // run/stop (switch // once/continuous (switch // cv switch // Note: don't mess with them. Negative_knob_radius = knob_radius_bottom*-1; // this is the decade counter.
- Diameter=22mm, height=40mm, Electrolytic Capacitor, .
- 0 main MK_SEQ/Schematics/Unseen Servant/Unseen.