Labels Milestones
BackConnector, M20-7810845, 8 Pins (http://www.molex.com/pdm_docs/sd/903250004_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 1-282834-0, 10 pins, pitch 5mm, size 60x9mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-10, 10 pins, pitch 5mm, size 37.3x14mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-11, 11 pins, pitch 10mm, size 12.3x14mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MPT-0,5-2-2.54, 2 pins, pitch 7.5mm, size 179x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Philmore pitch 5mm size 6.5x15mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-1,5-14-5.08, 14 pins, pitch 5mm, size 30x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311011_RT016xxHBWC_OFF-022771S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-15, 15 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00010 pitch 5mm size 51.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-405 45Degree pitch 10mm size 45x8.1mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00235, 5 pins, pitch 10mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, hole diameter 0.5mm test point THT pad rectangle square SMD pads Net tie, 3 pin, 2.0mm square SMD pads Net tie, 3 pin, 0.3mm round THT pads Net tie, 3 pin, 0.3mm round THT pads Net tie, 3 pin, 0.5mm square SMD pads Net tie, 4 pin, 2.0mm square SMD pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 4 pin, 0.5mm square SMD pads Net tie, 2 pin, 0.5mm square SMD pads Net tie, 4 pin, Right Angle, Surface Mount Single Row 2.54mm (0.1 inch) Pitch.
New Pull Request