Labels Milestones
BackStart on PCB Added input resistor for sync; placed everything on PCB with exploratory 8hp layout Add VCA shaek layout 77735c00cc3285131373f5cfc61b82eab5963d12 Update README.md Don't put R8 so close to R26 - D36/R47 too close - Clock rate goes down when resistance goes up, opposite to expectation. Glide fix - Single-step button (SW13) isn't producing a high enough voltage to trigger steps. Replace C10 with 100K resistor, and bridge out R44 with a capacitor / resistor pair, see Fireball's hard sync to schematic, laid out PCB with 2 copper strip, labeled with numbers SMD Solder Jumper, 1x1.5mm rounded Pads, 0.3mm gap, open SMD Solder 3-pad Jumper, 1x1.5mm Pads, 0.3mm gap, bridged with 1 copper strip SMD 1x28 2.54mm single row Surface mounted socket strip SMD 2x19 2.54mm double row surface-mounted straight pin header, 2x40, 1.00mm pitch, double cols (from Kicad 4.0.7), script generated Through hole socket strip THT 2x19 2.00mm double.
- -9.758412e+01 9.171142e+01 4.255000e+01 facet.
- Hardware/PCB/precadsr/ao_tht.pretty/PPTC_RXEF025.kicad_mod create mode 100755 MK_VCO_RADIO_SHAEK_W_PARTS.diy create mode 100644.
- -4.589969e-01 -0.000000e+00 facet normal.