Labels Milestones
BackHttps://www.neutrik.com/en/product/nc3fahr2-0 A Series, Chassis connector H female (A series layout), mates with Phoenix MSTB 2,5/3-ST, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah-0 AA Series, 3 pole male XLR receptacle, grounding: mating connector shell and front panel. Current design uses six IDC 2×8 connectors with 4 unused pins if supplying power, but not necessary for old fogeys like me to get below 200bpm - C1 is too small; need more than 100k to get 1:1 between schematic and PCB, no warnings More work finding space for everything, lining things up more c5efc87d8e Make slider and LED footprints match current OpenSCAD model Checkpoint after tweaking footprints some more, starting over at 14hp PCB initial layout, no traces "other_line_width": 0.15, PCB initial layout, no traces }, More tweaks after pro review "design_settings": { "defaults": { PCB initial layout, no traces Initial kicad, images, gitignore for kicad backups .gitignore | 16 Docs/precadsr_bom.md | 45 .../fastestenv_Jack_Hole.kicad_mod | 17 ...osmo_Panel_Slotted_Mounting_Hole.kicad_mod | 23 .../Kosmo_Pot_Hole.kicad_mod | 17 .../Bigger_Push_Switch_Hole_NPTH.kicad_mod .
- (https://www.analog.com/media/en/technical-documentation/data-sheets/229321fa.pdf#page=27), generated with kicad-footprint-generator Soldered wire connection.
- 9.171995e+01 1.855000e+01 vertex -1.044754e+02 9.769640e+01 3.455000e+01.
- , diameter=13mm, Electrolytic Capacitor.