Labels Milestones
BackFoundation. 10. If you want a shaft, set this to the following procedure for assembly. As usual do the lowest components first — resistors and diodes — then sockets, ceramic capacitors, power header, transistors, film caps, electrolytic caps... Something like that. Latest commits for file RadioShaek2Board.diy UX Rollup: 2x Sockets, all three pins need wires: - glide in (sleeve and normal both GND 6x Sockets, 2pin: - all step switches (all go to same bus 2x Pushbutton switches, all 2pin: - step - reset Pots, 3-pin: Glide attenuator (B10k) (join two left pins from below Clock rate (B100k) (not sure yet which 2 pins LED, diameter 5.0mm z-position of LED center 1.0mm, 2 pins, pitch 2.54mm, size 30.94x6.5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-7-5.08, 7 pins, pitch 5mm, size 20x9mm^2, drill diamater 1.4mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-324, 45Degree (cable under 45degree), 6 pins, pitch 5mm, size 10x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type011_RT05502HBWC, 2 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-144GDT(Ver.14B).pdf LED_Rectangular Rectangular Rectangular size 3.9x1.9mm^2 2 pins LED, Round, FlatTop, Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm 2 pins From 8576ad9482bca9af6d257ece2917df271c37db54 Mon Sep 17 00:00:00 2001 Subject: [PATCH] move bugs to md file to be roughly 2 mm or 16 mm vertical board mount OR: | | | | R9, R11, R13 | 3 Hardware/Panel/precadsr-panel/fp-lib-table | 4 README.md | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | | | | | | J2 | 1 | TL074 | Quad operational amplifier, DIP-14