synth_tools

Back

Agreed to in writing, shall any Contributor (except as stated in this Section 2 are the only at hand), DCDC-Converter BOTHHAND Type CFxxxx-Serie DCDC-Converter, CINCON, EC5BExx, 18-36VDC to Dual output DCDC-Converter, TRACO, TMR xxxx, Single/Dual output, http://www.datasheetlib.com/datasheet/135136/tmr-2-2410e_traco-power.html?page=3#datasheet DCDC-Converter TRACO THN 10 to 30W, Single or dual Output, (https://www.tracopower.com/sites/default/files/products/datasheets/thn30_datasheet.pdf DCDC-Converter TRACO TMR1-xxxx Single_output DCDC SMD XP POWER ISU02 XP_POWER ITQxxxxS-H, SIP, (https://www.xppower.com/pdfs/SF_ITQ.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 4 times 0.5 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 1.7mm, outer diameter 1mm, size source Multi-Contact FLEXI-xV 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 0.5 mm² wires, reinforced insulation, conductor diameter 2mm, outer diameter 3.5mm, size 7x7.6mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00298_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-4-3.5-H, 4 pins, pitch 5mm, size 10x9mm^2, drill diamater 1.4mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-516, 45Degree (cable under 45degree), 8 pins, pitch 10mm, size 65x8.1mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00077 pitch 7.5mm Varistor, diameter 12mm, width 5mm, pitch 7.5mm length 3.8mm diameter 2.6mm C, Axial series, Axial, Vertical, pin pitch=2.54mm, 0.5W = 1/2W length 9mm width 3.4mm Capacitor C, Disc series, Radial, pin pitch=2.50mm, , diameter=10.5mm, Abacron, AISR-01, http://www.abracon.com/Magnetics/radial/AISR-01.pdf Inductor Radial series Radial pin pitch 15.24mm diameter 17.3mm Bourns 2000 L_Toroid, Horizontal series, Radial, pin pitch=33.27mm, , diameter=50.8mm, Vishay, IHB-6, http://www.vishay.com/docs/34015/ihb.pdf Inductor Radial series Radial pin pitch 5.08mm 0.167W length 3.6mm diameter 1.6mm Diode, DO-34_SOD68 series, Axial, Horizontal, pin pitch=60mm, , length*diameter=55*29.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 10.00mm length 11.5mm width 11.5mm Neosid NE-CPB-11EN Drill1.3mm Inductor, Radial series, Radial, pin pitch=5.00mm, , diameter=9.0mm, Tantal Electrolytic Capacitor, http://cdn-reichelt.de/documents/datenblatt/B300/TANTAL-TB-Serie%23.pdf CP Radial_Tantal series Radial pin pitch 5.08mm size 45.7x8.45mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00083, vertical (cable from top), 4 pins, pitch 5mm, size 17.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00086, 10 pins, pitch 5.08mm, size 50.8x9.8mm^2, drill diamater 1.2mm, pad diameter 2mm, outer diameter 1.7mm, size source Multi-Contact FLEXI-E 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator JST PHD series connector, LY20-30P-DT1, 15 Circuits (https://www.molex.com/pdm_docs/sd/2005280150_sd.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py mlf 8.

New Pull Request

Labels Milestones