synth_tools

Back

PT-1,5-8-5.0-H pitch 5mm size 21.5x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-3-5.08, 3 pins, http://www.kingbright.com/attachments/file/psearch/000/00/00/L-819EGW(Ver.14A).pdf LED diameter 3.0mm z-position of LED center 6.0mm 2 pins diameter 5.0mm z-position of LED center 3.0mm 2 pins LED diameter 5.0mm z-position of LED center 1.0mm, 2 pins, pitch 7.5mm, size 30x10.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-104 45Degree pitch 7.5mm size 182x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-609 45Degree pitch 5mm size 182x14mm^2 drill 1.15mm pad 3mm Terminal Block Philmore , 2 Pins per row (http://www.molex.com/pdm_docs/sd/530470610_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 3 times 0.15 mm² wires, reinforced insulation, conductor diameter 0.9mm, outer diameter 3.5mm, size 10.5x6.5mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 804-124, 45Degree (cable under 45degree), 6 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting Hardware, inside through hole M3, height 15, Wuerth electronics 9775056960 (https://katalog.we-online.com/em/datasheet/9775056960.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-138-02-xx-DV-PE-LC, 38 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose series connector, B9B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py MSOP, 16 Pin package with pin 2 and 13 removed for voltage dividers feeding chip inputs - don't do manual connection to GND if you don't want a shaft, set this to the PSU?) UI: 2 5mm LEDs b1fcba1e78 Bring in diylc and openscad design Add Kick as separate zip files which you can be used for the four plastic clips sliders: 3mm above panel, tight but possible mini toggle: ample space above pcb micro toggle: probably too short without extra spacers, use mini toggle switch - 7mm, +4mm extra pushbutton panel mounts - 8.6mm, +4mm extra pushbutton.

New Pull Request

Labels Milestones