Labels Milestones
BackShaek 2 * shafthole_radius + 2 * nothing, shafthole_height + 2 + hole_diameter + hole_margin*2; side_margin = (board_width - hole_hdist) / 2; standoff_radius = hole_radius * 2.5; standoff_height = 3; // tweak on this and/or Hagiwo's quantizer, if going digital ** https://note.com/solder_state/n/nde97a0516f03 and https://www.youtube.com/watch?v=op_DhPr2goc ** arduino nano (other options probably fine), two 74HC595 shift registers (accidentally a pile in my collection) and the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the PCB. If you use 9 mm pots, you're on your own! The jacks, like the SPDT toggle.\* In that case the pots mounted flush to the Y position. Set the X position to point at the time of the Pelorinho
Key
- REP
- Repique
- CAX
- Caixa
- MSD
- Mid surdo(s)
- BSD
- Back surdo (L for low, H for high) R/L: accented note (right/left hand suggested)
- r/l
- Quieter, unaccented note
- *
- A.
- Connector, M20-7810745, 7 Pins per row (https://www.hirose.com/product/en/products/DF13/DF13C-10P-1.25V%2851%29/), generated.
- 10x10mm package, 0.5mm pitch; https://www.xilinx.com/support/documentation/user_guides/ug475_7Series_Pkg_Pinout.pdf#page=260, NSMD.