synth_tools

Back

Dual jack, half threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj6hf-1 Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, sleeve contact/front panel connection, https://www.neutrik.com/en/product/nrj4hf-1 Slim Jacks, 6.35mm (1/4in) stereo jack, switched, with full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hhd2 Slim Jacks, 6.35mm (1/4in) jack receptacle, vertical pcb mount, replaces NL4MD-V-2, https://www.neutrik.com/en/product/nl4mdxx-v-2 speakON Chassis Connectors, 4 pole female XLR receptacle, grounding: mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mahl A Series, 3 pole female XLR receptacle, grounding: without ground/shell contact, vertical PCB mount, replaces NL8MD-V, https://www.neutrik.com/en/product/nl8mdxx-v 4 contacts, 3.5mm audio plug, https://www.cuidevices.com/product/resource/pdf/sp-3541.pdf DC Barrel Jack 2mm or 2.5mm center pin, https://www.kycon.com/Pub_Eng_Draw/KLDX-0202-AC%20&%20BC.pdf power jack Consider incorporating additional LED indicators for active use of these should be changed to IDC 2×6 connectors. - If we expect or plan on developing modules which use the 4 pins RGB RGBLED LED, Round, FlatTop, diameter 3.0mm, 2 pins, pitch 2.5mm, size 5.5x5mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00243 pitch 10.2mm size 15.2x8.3mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type175_RT02704HBLC pitch 7.5mm size 89x15mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-409, 45Degree (cable under 45degree), 7 pins, pitch 3.5mm, size 17.5x7.6mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 3.5mm, size 32.5x8.3mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type175_RT02703HBLC, 3 pins, pitch 3.5mm, size 53.5x8.3mm^2, drill diamater 1.1mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-224, 45Degree (cable under 45degree), 4 pins, pitch 10.2mm, size 96.5x8.3mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using.

New Pull Request

Labels Milestones