synth_tools

Back

SMD 1210 (3225 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size from: http://datasheets.avx.com/AVX-HV_MLCC.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, basic insulation, conductor diameter 0.9mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type101_RT01602HBWC pitch 5.08mm size 20.3x8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-2-3.5-H pitch 3.5mm size 10.5x6.5mm^2 drill 1.2mm pad 2.4mm Terminal Block WAGO 236-403, 45Degree (cable under 45degree), 7 pins, pitch 10mm, size 92.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00306, 10 pins, pitch 5.08mm, size 35.6x8.45mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-3-2.5-V-THR, vertical (cable from top), 15 pins, pitch 5.08mm, size 71.1x11.2mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 13.16x6.5mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00297, 12 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.1 mm² wire, reinforced insulation, conductor diameter 0.9mm, length 10.0mm, width 2.4mm solder Pin_ press fit solder Pin_ with flat fork solder Pin_ with flat fork solder Pin_ with flat with fork, hole diameter 1.85mm wire loop with bead as test point, loop diameter 3.8mm, hole diameter 1.3mm, wire diameter 1.0mm THT rectangular pad as test point, pitch 7.62mm, hole diameter 1.5mm (loose fit), length 10.0mm solder Pin_ diameter 1.0mm, hole diameter 0.5mm test point wire loop with bead as test point, loop diameter 3.8mm, hole diameter 1.0mm, wire diameter 0.5mm test point THT pad as test Point, square 3.0mm side length.

New Pull Request

Labels Milestones