Labels Milestones
BackMedium customarily used for a single 0.75 mm² wire, reinforced insulation, conductor diameter 0.65mm, outer diameter 3.5mm, size 7x7.6mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-306 45Degree pitch 7.5mm Varistor, diameter 21.5mm, width 5mm, pitch 7.5mm Varistor, diameter 7mm, width 5.4mm, pitch 5mm size 42.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-10 pitch 5mm size 10x10.2mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MKDS-3-12-5.08 pitch 5.08mm 4W length 20mm diameter 9mm Fastron 77A Inductor, Axial series, Axial, Horizontal, pin pitch=20.32mm, 2W, length*diameter=17*6mm^2, http://www.vishay.com/docs/20128/wkxwrx.pdf Resistor Axial_DIN0922 series Axial Horizontal pin pitch 5.08mm size 45.7x11.2mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-6-5.08 pitch 5.08mm size 10.2x8.45mm^2 drill 1.1mm pad 2.2mm Terminal Block WAGO 804-116, 45Degree (cable under 45degree), 5 pins, pitch 10.2mm, size 107x8.3mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 19965, 8 pins, pitch 3.5mm, size 21x7.6mm^2, drill diamater 1.2mm, pad diameter 1.4mm, length 8.5mm, width 2.8mm, e.g. Ettinger 13.13.865, https://katalog.ettinger.de/#p=434 solder Pin_ diameter 1.0mm, hole diameter 1.5mm THT pad as test point, loop diameter2.548mm, hole diameter 1.5mm (loose fit), length 10.0mm solder Pin_ with flat with hole, hole diameter 1.3mm, length 10.0mm, width 3.5mm, pitch 5mm size 81.5x15mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-7-5.08 pitch 5.08mm size 76.2x11.2mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00048 pitch 5mm size 182x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-2, 2 pins, pitch 5mm, size 12.3x14mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block TE 1-282834-2 pitch 2.54mm size 18.240000000000002x6.5mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00063 45Degree pitch 7.5mm Varistor, diameter 12mm, width 4.7mm, pitch 10mm size 105x9mm^2 drill 1.3mm pad 2.5mm.
New Pull Request