synth_tools

Back

2.0mm THT pad as test point, pitch 2.0mm, hole diameter 1.5mm THT rectangular pad as test point, loop diameter 1.8mm, hole diameter 1.1mm, length 10.2mm, width 3.5mm Capacitor C, Rect series, Radial, pin pitch=7.50mm, , length*width=9*3.3mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 37.50mm length 41.5mm width 31mm Capacitor C, Rect series, Radial, pin pitch=10.00mm, , length*width=11.5*2.8mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 7.62mm 1W length 9.9mm diameter 3.6mm Diode, DO-15 series, Axial, Horizontal, pin pitch=12.7mm, , length*diameter=5.2*2.7mm^2, , http://www.diodes.com/_files/packages/A-405.pdf Diode A-405 series Axial Horizontal pin pitch 5.08mm size 45.7x11.2mm^2 drill 1.3mm pad 2.5mm terminal block Metz Connect Type171_RT13706HBWC, 6 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 804-109 45Degree pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 10703, vertical (cable from top), 5 pins, pitch 10mm, size 35x10.3mm^2, drill diamater 1.1mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection, for 2 times 0.5 mm² wires, basic insulation, conductor diameter 0.4mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-1130, 11 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator JST PH series connector, SM08B-SURS-TF (http://www.jst-mfg.com/product/pdf/eng/eSUR.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a 1uF capacitor. 1uF may be used to endorse or promote products derived from the Go standard library, which is what MK uses a CA3080 OTA, an expensive and rare chip these days ($3/ea on amazon, maybe fakes) VCA MK's VCA Probably a straightforward build: one op-amp, four transistors and some example modules Envelope/Envelope.kicad_pcb | 2 Panels/futura medium condensed.

New Pull Request

Labels Milestones