Labels Milestones
BackMKDS-3-6-5.08, 6 pins, pitch 10mm, size 162x14mm^2, drill diamater 1.2mm, pad diameter 2mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Hirose DF13 through hole, DF63R-1P-3.96DSA, 1 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog⟨=en&documentid=D31688_en), generated with kicad-footprint-generator ipc_noLead_generator.py VSON 10 Thermal on 11 3x3mm Pitch 0.5mm https://www.nxp.com/docs/en/application-note/AN10343.pdff Fairchild-specific MicroPak2-6 1.0x1.0mm Pitch 0.35mm https://www.nxp.com/docs/en/application-note/AN10343.pdff Fairchild-specific MicroPak2-6 1.0x1.0mm Pitch 0.35mm HVSON, 8 Pin (https://www.ti.com/lit/ds/symlink/tpa6110a2.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py TQFN, 24 Pin (http://www.alfarzpp.lv/eng/sc/AS3330.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py WQFN, 24 Pin (http://www.ti.com/lit/ds/symlink/tlc5971.pdf#page=39), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-141 , 11 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Straight solder pin 1 x 1 mm, 734-176 , 16 Pins per row (https://www.hirose.com/product/document?clcode=&productname=&series=DF11&documenttype=Catalog⟨=en&documentid=D31688_en), generated with kicad-footprint-generator Hirose DF13 through hole, DF11-16DP-2DSA, 8 Pins (http://www.molex.com/pdm_docs/sd/5024300820_sd.pdf), generated with kicad-footprint-generator Hirose DF13 through hole, DF11-20DP-2DSA, 10 Pins (http://www.molex.com/pdm_docs/sd/022272021_sd.pdf), generated with kicad-footprint-generator Harting har-flexicon series connector, 53261-1271 (http://www.molex.com/pdm_docs/sd/532610271_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for a 5mm led, with a nut behind the front panel. - Current design uses six IDC 2×8 connectors with 4 positions D Switch, single pole normally-open tactile switch K switch normally-open pushbutton push-button D Push button switch, normally closed, generic, four pins D Push button switch | | Tayda | A-826 | | R25 | 1 | 2_pin_Molex_connector | 2 | 10uF | Polarized capacitor | | C10 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS) | | | C6, C7, C8, C9 | 4 | 100 nF | Unpolarized capacitor | | J9 | 1 | SW_Push | Push button switch, generic, two pins