Labels Milestones
BackTO-252 TO-263 TO-268, https://www.fischerelektronik.de/pim/upload/fischerData/cadpdf/base/fk_244_13_d2_pak.pdf heatsink TO-252 TO-263 TO-268, https://www.fischerelektronik.de/pim/upload/fischerData/cadpdf/base/fk_244_13_d_pak.pdf Heatsink, 35mm x 13mm, 2x Fixation 2,5mm Drill, Soldering, Fischer SK104-STC-STIC, Heatsink, Sheet type, 50x7mm, 2 fixations (solder), Choke, SMD, 12x12mm 8mm height 7mm Non-Polar Electrolytic Capacitor CP, Axial series, Axial, Horizontal, pin pitch=7.62mm, , length*diameter=11*4.5mm^2, Fastron, MECC, http://www.fastrongroup.com/image-show/21/MECC.pdf?type=Complete-DataSheet&productType=series Inductor Axial series Axial Vertical pin pitch 5.00mm diameter 9mm C, Axial series, Axial, Vertical, pin pitch=5.08mm, , length*diameter=4*2mm^2, , http://www.diodes.com/_files/packages/DO-35.pdf Diode DO-35_SOD27 series Axial Horizontal pin pitch 5.00mm diameter 7.5mm width 2.5mm solder Pin_ with flat fork solder Pin_ press fit solder Pin_ with flat with hole, hole diameter 1.0mm low profile wire loop as test Point, diameter 3.0mm z-position of LED center 9.0mm, 2 pins, color: clear IR infrared LED diameter 3.0mm z-position of LED center 6.0mm, 2 pins LED diameter 5.0mm z-position of LED center 3.0mm, 2 pins, pitch 3.5mm, size 18.5x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00276_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-15-3.5-H, 15 pins, pitch 10mm, size 52.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-9-5.08 pitch 5.08mm size 15.2x11.2mm^2 drill 1.3mm pad 2.5mm terminal block connector http://www.phoenixcontact.com/us/products/1814760/pdf PhoenixContact PTSM0.5 4 2.5mm vertical SMD spring clamp terminal block Metz Connect Type701_RT11L03HGLU pitch 6.35mm size 19x12.5mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-13-5.08 pitch 5.08mm size 40.6x10.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-407, 45Degree (cable under 45degree), 4 pins, pitch 5mm, size 35x8.1mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-324, 45Degree (cable under 45degree), 16 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 20 Pin (http://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/ltc-legacy-qfn/QFN_20_05-08-1711.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py HTSSOP, 20 Pin (https://pdfserv.maximintegrated.com/package_dwgs/21-0140.PDF (T3255-9)), generated with kicad-footprint-generator ipc_noLead_generator.py LFCSP, 32 Pin (http://www.ti.com/lit/ds/symlink/msp430f1122.pdf#page=54), generated.
New Pull Request