Labels Milestones
BackBoth GND 6x Sockets, 2pin: - all step switches (all go to same bus) - run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: Glide attenuator (B10k) (join two left pins from below Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below) Pots, 2-pin: - Glide, manual (A100k) (two left pins, from below Clock rate (B100k) (not sure yet which 2 pins diameter 5.0mm z-position of LED center 6.0mm, 2 pins, pitch 2.54mm, package size 32.2x9.1x15mm^3, https://www.recom-power.com/pdf/Innoline/R-5xxxPA_DA.pdf dc-dc recom buck sip-3 pitch 2.54mm size 15.7x6.5mm^2 drill 1.1mm pad 2.2mm Terminal Block 4Ucon ItemNo. 10697, vertical (cable from top), 10 pins, pitch 5mm, size 61.5x15mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-109, 45Degree (cable under 45degree), 6 pins, dual row female, vertical entry, no latches, PN:G125-MVX1205L0X Harwin Gecko Connector, 16 pins, pitch 5mm, size 20x8mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310671_RT019xxHDWC_OFF-023605N.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-9-3.5-H pitch 3.5mm size 14.7x7mm^2 drill 1.2mm pad 3mm Terminal Block 4Ucon ItemNo. 10694, vertical (cable from top), 2 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E 0.1 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Mounting Hardware, inside through hole 3.3mm, height 6, Wuerth electronics 9774070243 (https://katalog.we-online.de/em/datasheet/9774070243.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py DFN8 2x2, 0.5P; No exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-85/ Infineon SO package 20pin without exposed pad (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-20-87/ 12-Lead Plastic DFN (4mm x 4mm); Pitch 0.5mm; EP 2.7x2.6mm; for InvenSense motion sensors; Mask removed below exposed pad; keepout area marked (Package see: https://store.invensense.com/datasheets/invensense/MPU9250REV1.0.pdf; See also https://www.invensense.com/wp-content/uploads/2015/02/InvenSense-MEMS-Handling.pdf sensor.
New Pull Request