synth_tools

Back

Phoenix PTSM-0,5-5-2.5-V-THR, vertical (cable from top), 5 pins, pitch 5mm, size 76.5x15mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/ru/system/files/productfiles/Data_sheet_310941_RT035xxHBLU_OFF-022742T.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type086_RT03406HBLC, 6 pins, pitch 5mm, size 20x9.8mm^2, drill diamater 0.7mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00287_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00069 pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-312, 45Degree (cable under 45degree), 3 pins, pitch 5.08mm, size 30.5x10.6mm^2, drill diamater 1.15mm, pad diameter 2mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Resistor SMD 0612 (1632 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1110, with PCB locator, 2 Pins (http://www.molex.com/pdm_docs/sd/559350210_sd.pdf), generated with kicad-footprint-generator JST VH series connector, S18B-PHDSS (http://www.jst-mfg.com/product/pdf/eng/ePHD.pdf), generated with kicad-footprint-generator JST ZE series connector, LY20-28P-DLT1, 14 Circuits (https://www.molex.com/pdm_docs/sd/2005280140_sd.pdf), generated with kicad-footprint-generator JST PH series connector, 502382-0770 (http://www.molex.com/pdm_docs/sd/5023820270_sd.pdf), generated with kicad-footprint-generator Molex Pico-Clasp series connector, B06B-ZESK-1D, with boss (http://www.jst-mfg.com/product/pdf/eng/eXH.pdf), generated with kicad-footprint-generator Mounting Hardware, inside through hole M3, height 8.6, Wuerth electronics 9771120360 (https://katalog.we-online.com/em/datasheet/9771120360.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSSOP28: plastic thin shrink small outline package; 48 leads; body width 3.9 mm; lead pitch 0.635; (see http://cds.linear.com/docs/en/datasheet/38901fb.pdf 28-Lead Plastic Shrink Small Outline (ST)-4.4 mm Body [VSON] http://www.ti.com/lit/ds/symlink/csd87334q3d.pdf VSON, 10 Pin (http://www.ti.com/lit/ds/symlink/tps7a91.pdf#page=30), generated with kicad-footprint-generator ipc_noLead_generator.py 16-Lead Ultra Thin Plastic Quad Flatpack (PH) - 16x16x1 mm Body, 2.00 mm [TQFP] (see Microchip Packaging Specification 00000049BS.pdf TQFP, 48 Pin (http://ww1.microchip.com/downloads/en/devicedoc/00002117f.pdf#page=69), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 0.5 mm² wires, reinforced insulation, conductor diameter 1.25mm, outer diameter 1mm, size source Multi-Contact FLEXI-E/HK 0.127 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, basic insulation, conductor diameter 1.4mm, outer diameter 3.5mm, size 38.5x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00297 pitch 5.08mm size 25.4x8.45mm^2 drill 1.1mm pad 2.1mm Terminal Block WAGO 236-424, 45Degree (cable under 45degree), 3 pins, pitch 2.5mm, size 19.7x10mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-603 45Degree pitch 5mm size 15x8mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-3-9-5.08 pitch 5.08mm size 25.4x8.45mm^2 drill 1.1mm pad 2.2mm Terminal Block Phoenix MKDS-1,5-8 pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-1,5-16, 16 pins, pitch 5.08mm, size 45.7x8.45mm^2, drill diamater 1.15mm, pad diameter 2.1mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Samtec HLE.

New Pull Request

Labels Milestones