Labels Milestones
BackHttps://www.digikey.com/en/products/detail/bourns-inc/PTL30-15O0-105A2/7314942 (orange A1M) The first two groups should be the same, see datasheet: https://www.mouser.com/datasheet/2/54/PTL-777483.pdf (page 4) if we want C3 and C4 could use larger spacing - C7 is a corner for narrower modules if we want them to match. We could generate CV some other way for now, such as: https://www.mouser.com/ProductDetail/Bourns/PTL30-15O0-105A2?qs=fV9UsjselOEqdQiKFAm%2Fog%3D%3D (A1M, orange LED, 30mm travel, 15mm shaft # Original README: Kassutronics Precision ADSR build notes Change C13 to 10 Alternative: Midi -> CV We could also go to same bus) - run/stop 2x Pushbutton switches, all 2pin: reset Pots, 3-pin: - Glide attenuator (B10k) (join two left pins from below - Glide, manual (A100k) (two left pins, from below - Clock rate (B100k) (not sure yet which 2 pins LED_Rectangular, Rectangular, Rectangular size 3.9x1.9mm^2 2 pins LED diameter 3.0mm z-position of LED center 3.0mm, 2 pins, pitch 5mm, size 32.3x14mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block connector PhoenixContact PTSM0,5 5 HV 2,5mm vertical SMD spring clamp terminal block RND 205-00247, 8 pins, pitch 7.5mm, size 182x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-401, 45Degree (cable under 45degree), 7 pins, pitch 5mm, size 61.5x15mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00088, 12 pins, pitch 9.52mm, size 28.6x12.5mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00296, 11 pins, pitch 5mm, size 10x8mm^2, drill diamater 1.2mm, pad diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00058, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 11.5x15mm^2, drill diamater 1.1mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-8-2.5-H-THR, 8 pins, pitch 10mm, size 82.3x14mm^2, drill diamater 1.15mm, pad diameter 2.4mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-E 0.15 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator.
- 0.963798 0.099271 facet normal 1.581503e-001 2.754714e-001 9.482110e-001.
- .../Kosmo_Panel_Mounting_Hole_NPTH.kicad_mod | 17 .../fastestenv_Switch_Hole.kicad_mod | 17 .../Kosmo_LED_Hole.kicad_mod.
- 9.901787e-01 1.398071e-01 -2.506079e-04 facet normal 0.555569.