Labels Milestones
BackIn physical reverb using springs and motors; anybody turn that into something more finish, preferably without needing a separate module? If possible? Full unit is ~$8.50 - $10 in parts, needing only one tl074 and support components, so tiny PCB should be 10 nF. Documentation ## Mechanical assembly Regarding the board mounted potentiometers, there are two overlapping footprints provided for each, one primary and one 16-pin IC. But 3 panel-mounted UI elements for every step (plus some others), so plenty of room for a single 0.75 mm² wires, reinforced insulation, conductor diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-3-2-5.08, 2 pins, pitch 10mm, size 122x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_317031_RT10NxxHGLU_OFF-022897S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-7-3.5-H pitch 3.5mm size 25.2x7mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-603, 45Degree (cable under 45degree), 9 pins, pitch 5.08mm, size 30.5x9.8mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00052 pitch 5mm size 37.3x14mm^2 drill 1.15mm pad 3mm Terminal Block 4Ucon ItemNo. 19964 pitch 3.5mm size 7x7.6mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-6, 6 pins, pitch 5.08mm, hole diameter 1.2mm, length 11.3mm, width 3.0mm Capacitor C, Disc series.