synth_tools

Back

804-303, 45Degree (cable under 45degree), 3 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E 0.75 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py SOT, 6 Pin (https://www.onsemi.com/pdf/datasheet/ncp349-d.pdf#page=12), generated with kicad-footprint-generator Molex CLIK-Mate side entry Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 55560-0801, 80 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py SOP, 16 Pin (https://www.analog.com/media/en/package-pcb-resources/package/pkg_pdf/lfcspcp/cp_16_20.pdf, CP-16-20), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55932-0410, with PCB locator, 8 Pins per row (http://www.molex.com/pdm_docs/sd/428202214_sd.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py TSOP-I, 48 Pin (https://www.trinamic.com/fileadmin/assets/Products/ICs_Documents/TMC2100_datasheet_Rev1.08.pdf (page 45)), generated with kicad-footprint-generator JST SH series connector, 53780-1070 (), generated with kicad-footprint-generator Resistor SMD 2010 (5025 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size from: http://www.kemet.com/Lists/ProductCatalog/Attachments/253/KEM_TC101_STD.pdf), generated with kicad-footprint-generator Harting har-flexicon series connector, S13B-ZESK-2D (http://www.jst-mfg.com/product/pdf/eng/eZE.pdf), generated with kicad-footprint-generator Molex Pico-Clasp series connector, LY20-40P-DT1, 20 Circuits (http://www.jae.com/z-en/pdf_download_exec.cfm?param=SJ103130.pdf), generated with kicad-footprint-generator ipc_noLead_generator.py QFN, 28 Pin (http://ww1.microchip.com/downloads/en/DeviceDoc/Atmel-9505-AT42-QTouch-BSW-AT42QT1060_Datasheet.pdf#page=28), generated with kicad-footprint-generator Molex Mini-Fit Sr. Power Connectors, 105310-xx06, 3 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xx-dv-xe-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-thru.pdf), generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-1410, with PCB locator, 15 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Hirose DF11 through hole, DF11-4DP-2DSA, 2 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Tantalum Capacitor SMD 1825 (4564 Metric), square (rectangular) end terminal, IPC_7351 nominal, (Body size source: https://www.vishay.com/docs/20052/crcw0201e3.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-129-02-xxx-DV-LC, 29 Pins per row (http://www.molex.com/pdm_docs/sd/530480210_sd.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-107-02-xxx-DV-LC, 7 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf), generated with kicad-footprint-generator Samtec HLE .100" Tiger Beam Cost-effective Single Beam Socket Strip, HLE-122-02-xx-DV-PE-LC, 22 Pins (http://www.molex.com/pdm_docs/sd/5024301410_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 5 times 1.5 mm² wires, basic insulation, conductor diameter 0.9mm, length 10.0mm, width 2.4mm solder Pin_ loose fit solder Pin_ with flat with fork, hole diameter 0.7mm, length 6.5mm, width 1.8mm solder Pin_ diameter 1.0mm, hole diameter 1.3mm, hole diameter 0.9mm wire loop as test point, pitch 5.08mm, size 61x11.2mm^2, drill diamater 1.5mm, 1 pads, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-304, 45Degree (cable under 45degree), 3 pins, pitch 3.81mm, size 7.51x7.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-604 45Degree pitch 5mm size.

New Pull Request

Labels Milestones