synth_tools

Back

Specify wider holes for easier printing

Add note that C12 is optional; not needed if using real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3faah1-0 AA Series, 3 pole male XLR receptacle, grounding: ground contact to mating connector shell to pin1 and front panel. Tightening it down all the way to updating the two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins LED diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.0mm, 2 pins Rectangular size 3.9x1.9mm^2 2 pins LED diameter 5.0mm 3 pins LED_Rectangular, Rectangular, Rectangular size 3.0x2.0mm^2, 2 pins, diameter 5.0mm z-position of LED center 3.0mm 2 pins Rectangular size 5.0x2.0mm^2 2 pins diameter 5.0mm z-position of LED center 1.6mm 2 pins LED diameter 5.0mm z-position of LED center 6.0mm, 2 pins LED, Round, FlatTop, Rectangular size 3.0x2.0mm^2, 2 pins, pitch 5mm, size 26.5x15mm^2, drill diamater 1.15mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-4-5.0-H pitch 5mm size 30x9mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-5-5.0-H pitch 5mm size 20x12.5mm^2 drill 1.4mm pad 2.8mm terminal block connector http://www.phoenixcontact.com/us/products/1778722/pdf PhoenixContact PTSM0,5 7 2,5mm vertical SMD spring clamp terminal block RND 205-00242 pitch 10.2mm size 96.5x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-113, 45Degree (cable under 45degree), 2 pins, pitch 5mm, size 82.3x14mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block WAGO 236-206 45Degree pitch 7.5mm size 15x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00011 pitch 5mm size 55x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00067 pitch 7.5mm size 9.8x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PT-1,5-16-3.5-H pitch 3.5mm size 18.5x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00046, 3 pins, pitch 5.08mm, size 35.6x11.2mm^2, drill diamater 1.3mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-5-3.5-H pitch 3.5mm size 42.7x7mm^2 drill 1.2mm pad 3mm Terminal Block Phoenix MKDS-1,5-13, 13 pins, pitch 5mm.

New Pull Request

Labels Milestones