Labels Milestones
BackMount, https://www.neutrik.com/en/product/nc3fah2 A Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, switched, half threaded nose, https://www.neutrik.com/en/product/nrj6hh-au Slim Jacks, 6.35mm (1/4in) stereo jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hh Slim Jacks, 6.35mm (1/4in) mono jack, switched, fully threaded nose, https://www.neutrik.com/en/product/nrj6hf-au Slim Jacks, 6.35mm (1/4in) mono jack without switching contact, vertical PCB mount, https://www.neutrik.com/en/product/ncj9fi-h-0 Combo I series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbhr B Series, 3 pole female XLR receptacle, grounding: ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nl4md-h-3 speakON Chassis Connectors, 4 pole male XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, horizontal PCB mount, black chrome shell, https://www.neutrik.com/en/product/nc3fbv2-b B Series, 4 pole chassis connector, nickel metal square G-size flange, self tapping screw holes (A-screw), horizontal PCB mount, https://www.neutrik.com/en/product/nc3mbv-0 B Series, 3 pole XLR female receptacle with 6.35mm (1/4in) stereo jack, metal nose with efficient chassis ground connection, T+R+S normalling contact, https://www.neutrik.com/en/product/nrj6hm-1 Stacking Jacks, Mono dual jack, full threaded nose and offset PCB pins, https://www.neutrik.com/en/product/nmj6hcd2 M Series, 6.35mm (1/4in) mono jack without switching contact, horizontal PCB mount, asymmetric push, https://www.neutrik.com/en/product/nc3faav1-da AA Series, 3 pole female XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, horizontal PCB mount, https://www.neutrik.com/en/product/nc3maah AA Series, 3 pole female XLR receptacle, switching contacts, grounding: separate ground contact to mating connector shell and front panel: mini toggle: 4mm above panel, tight but possible mini toggle: 4mm above panel, ample thunkicons: probably too tight; could work with printed spacers mini toggle: ample space above pcb micro toggle: 0mm above panel; could work with printed spacers and existing lead lengths alpha.
New Pull Request