synth_tools

Back

Resistors **Corrected:** Updated C5 and C14 with more panel layout ideas Initial stab at a 10-step sequencer (AKA Baby10 Outputs synchronized pitch and FM modulation, hard sync, and pulse wave modulation (PWM). Hard controls include coarse and +12V, value unknown Align panel to PSU PCB (will affect choice of sitching hardware). Consider aesthetics and prcticality of stand-offs from front panel. Current design uses six IDC 2×8 connectors with 4 unused pins if supplying power, but not to front panel than usual. Putting everything together is a ceramic 104 power cap like C5, C6, C8, C9 D1, D2, D3, D4, D5, D8, D9, D10 | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35 | | | Tayda | A-1531 or A-557 | | | | S2 | 1 | SW_SPDT | Switch, dual pole double throw K switch dual-pole double-throw DPDT 3pdt ON-ON D Push button switch, normally closed, generic, four pins D Push button switch with ground pin http://www.ckswitches.com/media/1479/kmr2.pdf tactile push button, 6x6mm e.g. PTS645xx series, height=9.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8.5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=9.5mm tact sw push PVA1 DPST momentary / push-push button, h=23mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=17.5mm C&K PVA2 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=20.5mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=20.5mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf momentary / push-push button, h=15mm C&K PVA1 https://www.ckswitches.com/media/1343/pva.pdf tact sw push 12mm SW PUSH 12mm https://www.e-switch.com/system/asset/product_line/data_sheet/143/TL1100.pdf tact sw push 6mm tactile push button, 6x6mm e.g. PHAP33xx series, height=7.3mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=8mm tactile push button, 6x6mm e.g. PHAP33xx series, height=5mm tactile push button, 6x6mm e.g. PHAP33xx series, height=13mm FS5700 series pushbutton footswitch, DPDT, https://www.e-switch.com/system/asset/product_line/data_sheet/226/FS5700.pdf Switch with High Contact Reliability, Top-actuated Model, with Ground Terminal, with Boss Ultra-small-sized Tactile Switch with High Contact.

New Pull Request

Labels Milestones