Labels Milestones
Back15x9.8mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-4-2.5-V-THR, vertical (cable from top), 8 pins, pitch 5mm, size 35x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MPT-0,5-4-2.54, 4 pins, pitch 7.5mm, size 29x15mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-212, 45Degree (cable under 45degree), 10 pins, pitch 5mm, size 15x8.1mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type073_RT02602HBLU, 2 pins, pitch 3.5mm, size source Multi-Contact FLEXI-E 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_gullwing_generator.py DSO DSO-8 SOIC SOIC-8 Infineon PG-DSO 12 pin, exposed pad, 4x4mm body, pitch 0.5mm (http://www.analog.com/media/en/package-pcb-resources/package/56702234806764cp_24_3.pdf, http://www.analog.com/media/en/technical-documentation/data-sheets/ADL5801.pdf LFCSP VQ, 24 pin, exposed pad: 4.5x8.1mm, (https://www.infineon.com/cms/en/product/packages/PG-DSO/PG-DSO-12-9/ Infineon PG-DSO 12 pin, exposed pad, 4x4mm body, pitch 0.5mm, thermal vias in pads, 4 Pins per row (https://cdn.harwin.com/pdfs/M20-781.pdf), generated with kicad-footprint-generator Molex SlimStack Fine-Pitch SMT Board-to-Board Connectors, 52991-0708, 70 Pins (https://www.molex.com/pdm_docs/sd/537480308_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.5 mm² wire, basic insulation, conductor diameter 2.4mm, outer diameter 4.4mm, size source Multi-Contact FLEXI-xV 1.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.15 mm² wires, reinforced insulation, conductor diameter 0.9mm, length 10.0mm, width 2.4mm solder Pin_ with flat with fork, hole diameter 1.0mm wire loop as test Point, square 4.0mm side length SMD rectangular pad as test Point, square 4.0mm side length, hole diameter 1.5mm SMD pad as test Point, square 2.0mm_Drill1.0mm side length, hole diameter 2.0mm THT pad as test point, pitch 2.54mm, size 20.78x6.5mm^2, drill diamater 1.15mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00010, 11 pins, pitch 7.5mm, size 30x10.3mm^2, drill diamater 1.3mm, pad diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00030, 9 pins, pitch 5.08mm, size 50.8x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00234 pitch 5.08mm size 55.9x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-624, 45Degree (cable under 45degree), 6 pins, pitch 7.5mm, size 32.3x14mm^2, drill.