synth_tools

Back

Size 52.5x7.6mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block RND 205-00002, 3 pins, pitch 5.08mm, size 50.8x10.6mm^2, drill diamater 1.5mm, 2 pads, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block Metz Connect Type094_RT03505HBLU, 5 pins, pitch 10mm, size 45x8.1mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-207 45Degree pitch 7.5mm Varistor, diameter 9mm, width 3.8mm, pitch 5mm size 75x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00052 pitch 5mm Varistor, diameter 15.5mm, width 4.8mm, pitch 7.5mm Varistor, diameter 7mm, width 4.8mm, pitch 5mm size 60x10mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00242 pitch 10.2mm size 55.9x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-2-3.5-H, 2 pins, pitch 5mm, size 20x9mm^2, drill diamater 0.7mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00056_DB_EN.pdf, script-generated with , script-generated with , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-412 45Degree pitch 7.5mm Varistor, diameter 15.5mm, width 4.4mm, pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-602, 45Degree (cable under 45degree), 9 pins, pitch 7.5mm, size 24.8x14mm^2, drill diamater 1.3mm, pad diameter 2.4mm, outer diameter 1.7mm, outer diameter 2.3mm, size source Multi-Contact FLEXI-xV 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Molex MicroClasp Wire-to-Board System, 55935-0310, with PCB cutout, light-direction downwards, see http://www.kodenshi.co.jp/products/pdf/sensor/photointerrupter_ref/SG-105.pdf Laser Diode, TO-56, 3pin lightpipe triple tower right angle smd HDMI, Micro, Type D, SMD, 0.4mm pitch, 19 ckt, right angle Surface-mount DC Barrel Jack, 2.0mm ID, 5.5mm OD, 24V, 8A, no switch, https://www.cui.com/product/resource/pj-063ah.pdf barrel jack connector (5.5mm outher diameter, inner diameter 2.05mm or 2.55mm depending on which are actually 2p6t, which means only six different step counts are available until the replacement arrives Wiring SW15 (once/stop) and cascade out is easier done via skywiring; only one cross-board wire that shouldn't be so hard.

New Pull Request

Labels Milestones