synth_tools

Back

The line: * in your OpenSCAD script and call either... * knurled_cyl( Knurled cylinder outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 4 times 1 mm² wires, reinforced insulation, conductor diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-15-5.0-H, 15 pins, pitch 5mm, size 26.5x15mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block Metz Connect Type171_RT13703HBWC pitch 7.5mm Varistor, diameter 12mm, width 6.7mm, pitch 5mm, size 35x9.8mm^2, drill diamater 1.3mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00242, 3 pins, pitch 7.5mm, size 60x10.3mm^2, drill diamater 1.1mm, pad diameter 3mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type086_RT03403HBLC, 3 pins, pitch 5mm, size 35x9mm^2, drill diamater 1.5mm, 1 pads, pad diameter 2.5mm, hole diameter 1.3mm, length 10.0mm, width 2.4mm solder Pin_ press fit solder Pin_ with flat with hole, hole diameter 1.0mm test point plated hole Plated Hole as test Point, diameter 4.0mm Plated Hole as test Point, diameter 2.0mm, hole diameter 0.9mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-E 0.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times 0.5 mm² wires, basic insulation, conductor diameter 2.4mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-12 pitch 5mm size 30x9.8mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00075, 10 pins, pitch 3.81mm, size 7.51x7.3mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00007 pitch 5mm size 30x7.6mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 236-212, 45Degree (cable under 45degree), 5 pins, pitch 5mm, size 71.5x15mm^2, drill diamater 1.2mm, pad diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-4-5.08, 4 pins, pitch 5mm, size 10x10.2mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 804-105 45Degree pitch 5mm size 10x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00031 pitch 10mm Varistor, diameter.

New Pull Request

Labels Milestones