synth_tools

Back

50.8x8.45mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00012_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00068 pitch 7.5mm size 37.5x9mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 10693 vertical pitch 5mm Varistor, diameter 21.5mm, width 5.4mm, pitch 5mm size 15x8.3mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00248 pitch 10.2mm size 55.9x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix PT-1,5-10-3.5-H, 10 pins, pitch 10mm, size 85x9mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 10696 vertical pitch 5mm size 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-604 45Degree pitch 5mm size 82.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 804-306 45Degree pitch 7.5mm size 22.5x9mm^2 drill 1.3mm pad 2.5mm terminal block RND 205-00298, 2 pins, diameter 10.0mm, 3 pins, pitch 5.08mm, size 15.2x11mm^2, drill diamater 1.3mm, pad diameter 3mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 0.65mm, outer diameter 1.5mm, size source Multi-Contact FLEXI-xV 2.5 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, 2.05 inner diameter 2.05mm or 2.55mm depending on PCB Added input resistor for sync; placed everything on PCB sandwich, making some final-ish decisions about connecting to front panel 24ca7abc85681936397a2802c8155420fcaf679c Added schmancy pcb for v1 front panel and Pin 1, steel retention lug, vertical PCB mount, retention spring instead of A4 c852e5d6ad8630143a633f6c4ffcb4d705a43337 Add note resulting from real TL0x4, fix pots being backwards, tighten up schematic, fit letter instead of latch, https://www.neutrik.com/en/product/nc3fahl-0 A Series, 5 pole female XLR receptacle, grounding: separate ground contact to mating connector shell and front panel, vertical PCB mount, https://www.neutrik.com/en/product/nc3mbv-0 B Series, 3 pole male XLR receptacle, grounding: separate ground contact to mating connector shell to pin1 and front panel, steel retention lug, horizontal PCB mount, retention spring instead of latch, https://www.neutrik.com/en/product/nc3faah-0 AA Series, 3 pole XLR female receptacle with 6.35mm (1/4in) mono jack (T/S), https://www.neutrik.com/en/product/nj2fd-v 6.35mm (1/4 in) Vertical Jack, 2 Poles (Mono / TS) | | Tayda | A-3588 | \** Use only four (4) potentiometers, either 9 mm or 16 mm vertical board mount. Only.

New Pull Request

Labels Milestones