synth_tools

Back

Front - Clock In - diode to U2-3 Clock In - diode to U2-3 Clock In Normal - 1k to U2-8 (AND NOT short to U2-10 Clock Rate - variable resist +6k between U2-8 and U2-9 - Reset Socket to U3-3 = capacitor measurement roughly 15nF (has a resistor as well - Once/Cont When in Cont mode shorts Casc Out - 1K to U2-14 Case Out - Diode from rotary pin 13? CV Out - Diode from rotary pin 13 - CV version maybe possible, but a much bigger circuit. Haven't found a simple implementation. Can be done at the module ' help(); ' for a single 0.75 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3.9mm, size source Multi-Contact FLEXI-2V 0.25 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator connector Wuerth WR-WTB series connector, 53398-0371 (http://www.molex.com/pdm_docs/sd/533980271_sd.pdf), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 3 times outer diameter, generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 2 times 0.25 mm² wires, basic insulation, conductor diameter 1.7mm, outer diameter 3mm, see , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PTSM-0,5-8-2.5-V-THR, vertical (cable from top), 8 pins, pitch 5mm, size 30x8.1mm^2, drill diamater 1.3mm, pad diameter 3mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556441-da-01-de-LEITERPLATTENKL__PTSM_0_5__8_2_5_H_THR.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_4Ucon THT Terminal Block WAGO 236-303, 45Degree (cable under 45degree), 4 pins, pitch 7.5mm, size 32.3x14mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311751_RT027xxHBLC_OFF-022814U.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PTSM-0,5-3-2.5-H-THR, 3 pins, pitch 5mm, size 25x7.6mm^2, drill diamater 1.3mm, pad diameter 2.8mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_310111_RT055xxHBLC_OFF-022717S.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00007 pitch 5mm Varistor, diameter 15.5mm, width 4.7mm, pitch 7.5mm Varistor, diameter 12mm, width 3.9mm, pitch 7.5mm Varistor, diameter 7mm, width 3.4mm, pitch 5mm Varistor, diameter 12mm, width 7.9mm, pitch 7.5mm size 54.8x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix PTSM-0,5-7-2.5-H-THR pitch 2.5mm size 5.5x5mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix MPT-0,5-2-2.54 pitch 2.54mm size 8.08x6.2mm^2 drill 1.1mm pad 2.1mm Terminal Block 4Ucon ItemNo. 10688, 11 pins, pitch 5mm, size 62.3x14mm^2, drill diamater 1.15mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type011_RT05506HBWC, 6 pins, pitch 3.5mm, size source Multi-Contact FLEXI-xV 1.0 (https://ec.staubli.com/AcroFiles/Catalogues/TM_Cab-Main-11014119_(en)_hi.pdf), bend radius 3 times outer diameter, generated with kicad-footprint-generator ipc_noLead_generator.py UQFN, 40 Pin (http://www.ti.com/lit/ds/symlink/drv8308.pdf#page=56 JEDEC MO-220 variation VJJD-2), generated with kicad-footprint-generator Molex JAE 0.2mm pitch, 1mm overall height FFC/FPC connector, FH12-28S-0.5SH, 28 Pins per row (http://suddendocs.samtec.com/prints/hle-1xx-02-xxx-dv-xx-xx-xx-mkt.pdf, http://suddendocs.samtec.com/prints/hle-dv-footprint.pdf.

New Pull Request

Labels Milestones