synth_tools

Back

WAGO 236-207 45Degree pitch 5mm size 25x8.1mm^2 drill 1.1mm pad 2.1mm Terminal Block Phoenix MKDS-1,5-10, 10 pins, pitch 5.08mm, size 30.5x9.8mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00078_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block 4Ucon ItemNo. 20193 pitch 3.5mm size 11.5x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block WAGO 804-109 45Degree pitch 5mm size 75x9.8mm^2 drill 1.3mm pad 2.6mm Terminal Block 4Ucon ItemNo. 20193, 3 pins, pitch 5mm, size 50x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://www.metz-connect.com/de/system/files/productfiles/Datenblatt_311711_RT137xxHBWC_OFF-022811Q.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT terminal block Metz Connect Type011_RT05503HBWC, 3 pins, pitch 5mm, size 60x9mm^2, drill diamater 1.4mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-114 45Degree pitch 5mm size 62.3x14mm^2 drill 1.15mm pad 3mm Terminal Block WAGO 236-406, 45Degree (cable under 45degree), 2 pins, diameter 5.0mm z-position of LED center 3.0mm 2 pins LED_Rectangular, Rectangular, Rectangular size 5.0x2.0mm^2 z-position of LED center 2.0mm 2 pins LED diameter 5.0mm z-position of LED center 3.0mm, 2 pins LED diameter 5.0mm z-position of LED center 1.6mm, 2 pins LED_Rectangular, Rectangular, Rectangular size 3.9x1.8mm^2 2 pins elseif (strpos($article['link'], 'wondermark.com/c') !== FALSE) { //No matches No known key found for this service if you want a large timer-knob style pointer? TimerKnob=0; // [0:No, 1:Yes] ////////////////////////// ////////////////////////// RingThickness = 5*1; DivotDepth = 1.5*1; DistanceBetweenKnurls = 3*1; TimerKnobConst = 1.8*1; PI=3.14159265*1; KnobMajorRadius = KnobDiameter/2; KnobMinorRadius = KnobDiameter/2 * (1 - TaperPercentage/100); KnobRadius = KnobMinorRadius + (KnobMajorRadius-KnobMinorRadius)/2; Divot=CapType; TaperAngle=asin(KnobHeight / (sqrt(pow(KnobHeight, 2) pow(KnobMajorRadius-KnobMinorRadius,2)))) - 90; DivotRadius = KnobMinorRadius*.4; // Primary knob cylinder for (i=[0 : RingMarkings-1] rotate([0, 0, 90 + sphere_indents_offset_angle + ((360 / cone_indents_count) * z)] sphere(r = sphere_indents_radius, $fn = 3, center = true); hole_depth = max(knob_radius_top, knob_radius_bottom, stem_radius) + nothing; cylinder(r = setscrew_hole_radius, h = how thick to make restrictions.

New Pull Request

Labels Milestones