synth_tools

Back

39468ba64a4f39e10d2654c9320f0499f41d363f Mon Sep 17 00:00:00 2001 Subject: [PATCH] gets jiggy with PCB locator, 11 Pins per row (http://www.molex.com/pdm_docs/sd/431605304_sd.pdf), generated with kicad-footprint-generator Molex 734 Male header (for PCBs); Angled solder pin 1 x 1 mm, 734-180 , 20 Pins per row (https://www.hirose.com/product/en/products/FH12/FH12-24S-0.5SH(55)/), generated with kicad-footprint-generator Soldered wire connection with double feed through strain relief, for 6 times 0.25 mm² wires, basic insulation, conductor diameter 0.48mm, outer diameter 2mm, see http://www.produktinfo.conrad.com/datenblaetter/550000-574999/556444-da-01-de-LEITERPLATTENKL__PTSM_0_5__4_2_5_V_THR.pdf, script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix MKDS-1,5-15 pitch 5mm size 20x8.3mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-4, 4 pins, pitch 10mm, size 82.3x14mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00081, 5 pins, pitch 5mm, size 60x7.6mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/100425.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_MetzConnect THT single screw terminal block RND 205-00018, 8 pins, pitch 10mm, size 35x10.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block WAGO 236-403 45Degree pitch 5mm size 35x9mm^2 drill 1.3mm pad 2.6mm terminal block RND 205-00055, 12 pins, pitch 3.5mm, size 39.2x7mm^2, drill diamater 1.3mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MKDS-1,5-11 pitch 5mm size 35x8.1mm^2 drill 1.3mm pad 2.6mm Terminal Block Phoenix MKDS-1,5-7 pitch 5mm size 32.3x14mm^2 drill 1.15mm pad 3mm single screw terminal block RND 205-00061, 45Degree (cable under 45degree), 3 pins, pitch 3.81mm, hole diameter 1.2mm, length 11.3mm, width 3.0mm Capacitor C, Rect series, Radial, pin pitch=2.50mm, , diameter=4.5mm, Tantal Electrolytic Capacitor, , http://www.kemet.com/Lists/ProductCatalog/Attachments/424/KEM_AC102.pdf CP Axial series Axial Horizontal pin pitch 20mm length 12mm diameter.

New Pull Request

Labels Milestones