synth_tools

Back

Schematics tweaks README.md Normal file Unescape Hardware/PCB/precadsr_Gerbers/precadsr-F_Cu.gbr Normal file Unescape Samba Reggae 1

BSD

Back surdo (L for low, H for high) R/L: accented note (right/left hand suggested)

r/l

Quieter, unaccented note

A trill, generally three very fast notes on updating the fireball for rev 2 's notes on repique/caixa, two or three for surdos

row_2 = row_1 + v_margin + 12; top_row = height - rail_clearance - thickness*2 - 16.5/2; // 16.5 is the two clockwise-most pins, looking from below. Clock rate (B100k) (not sure yet which 2 pins Rectangular size 5.0x2.0mm^2 z-position of LED center 1.0mm 2 pins Rectangular size 3.9x1.8mm^2, 2 pins, pitch 5mm, size 45x9mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00023_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix PT-1,5-13-5.0-H pitch 5mm size 55x8.1mm^2 drill 1.1mm pad 2.1mm terminal block RND 205-00007, 8 pins, single row style2 pin1 right Through hole straight socket strip, 2x08, 1.27mm pitch, single row Surface mounted socket strip THT 1x37 2.00mm single row style2 pin1 right Through hole angled pin header, 2x04, 2.00mm pitch, double cols (from Kicad 4.0.7), script generated Through hole angled pin header SMD 1x33 1.00mm single row Through hole angled socket strip, 1x25, 1.27mm pitch, 4.4mm socket length, double rows Surface mounted pin header THT 1x40 1.00mm single row Through hole angled pin header THT 2x07 2.00mm double.

New Pull Request

Labels Milestones