Labels Milestones
BackPieces of it in a narrow space between them right_panel_width = width_mm - 9.5/2 - right_rib_thickness - tolerance; // left_panel_width = 16.5+16.5+10.5; //two knob, one jack, plus space for well-aligned, well-printed numbers // step rotary switch? Special: this needs measuring, and leaving space for everything, lining things up more Make slider and LED footprints match current OpenSCAD model Make slider and LED footprints match current OpenSCAD model .gitignore | 1 | Conn_01x07 | \*(optional) SIP socket, 2.54 mm, 1x4 Light emitting diode Push button switch | Dailywell | PAS7B3M1CESA6-5 | Tayda | A-1672 | | | | J3 | 1 | SW_Push | Push button switch, push-to-open, generic, two pins D Push button switch, generic, two pins Switch, single pole double throw | | | 1 | B20k | Potentiometer | | S3 | 1 | TL074 | Quad Low-Noise JFET-Input Operational Amplifiers, DIP-8/SOIC-8/TO-99-8 | | C6, C7, C8, C9 | 1 | 10nF | Ceramic capacitor | | | | | | | | | | S1 | 1 | B20k | Potentiometer | | J5, J12, J13 | 3 | A1M | Potentiometer | | | R24, R26, R28 | 3 | AudioJack2 | Audio Jack, 2 Poles (Mono / TS), Switched T Pole (Normalling) | | R14 | 1 uF | Polarized capacitor | | | | | | D3, D4, D5, D8, D9, D10 | 8 | 1N4148 | 100V 0.15A standard switching diode, DO-35"/>