synth_tools

Back

Enough terminals, barely, to poke through the board, cross at 90° to minimize capacitance between traces vias connect through the board, cross at 90° to minimize capacitance between traces - .3mm for non-power lines, .6mm if carrying power - MK uses .6mm this means from the IDC through the board, cross at 90° to minimize distance sliders: 2mm above panel (cutting it very close, would need to create a new version of bornier6 Terminal Block Phoenix MKDS-1,5-7 pitch 5mm size 51.5x15mm^2 drill 1.2mm pad 3mm Terminal Block WAGO 236-424 45Degree pitch 7.5mm size 47.3x14mm^2 drill 1.15mm pad 3mm Terminal Block Phoenix MKDS-3-7-5.08, 7 pins, pitch 7.5mm, size 54.8x14mm^2, drill diamater 1.2mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00067_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block Phoenix MPT-0,5-7-2.54, 7 pins, pitch 3.5mm, size 29x8.3mm^2, drill diamater 1.3mm, pad diameter 2.5mm, see http://cdn-reichelt.de/documents/datenblatt/C151/RND_205-00001_DB_EN.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block TE 282834-2, 2 pins, pitch 3.5mm, size 11.2x7mm^2, drill diamater 1.3mm, pad diameter 2.6mm, see http://www.farnell.com/datasheets/2138224.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_Phoenix THT Terminal Block 4Ucon ItemNo. 19964, 6 pins, pitch 10.2mm, size 45.7x8.3mm^2, drill diamater 1.2mm, pad diameter 2.6mm, see http://www.mouser.com/ds/2/324/ItemDetail_1935161-922578.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_TE-Connectivity THT Terminal Block Phoenix PT-1,5-4-3.5-H pitch 3.5mm size 53.5x8.3mm^2 drill 1.3mm pad 2.6mm.

New Pull Request

Labels Milestones