synth_tools

Back

SWITCH SMD KSA SW 4-bit rotary coded switch, J-hook, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf 4-bit rotary coded switch, gull wing, Gray code, https://www.nidec-copal-electronics.com/e/catalog/switch/sh-7000.pdf SMD SMT crystal hand-soldering SMD Resomator/Filter Murata SFSKA, http://cdn-reichelt.de/documents/datenblatt/B400/SFECV-107.pdf, 7.9x3.8mm^2 package Diode SMD 1812 (4532 Metric), square (rectangular) end terminal, IPC_7351 nominal with elongated pad for handsoldering. (Body size source: http://www.vishay.com/docs/20056/crcw01005e3.pdf), generated with kicad-footprint-generator JST PH series connector, B2B-PH-SM4-TB (http://www.jst-mfg.com/product/pdf/eng/ePH.pdf), generated with kicad-footprint-generator ipc_gullwing_generator.py 10-Lead SSOP, 3.9 x 4.9mm body, 1.00mm pitch (http://www.st.com/resource/en/datasheet/viper01.pdf SSOP 3.9 4.9 1.00 SSOP14: plastic shrink small outline package; 8 leads; body width 5.3 mm; (see NXP SSOP-TSSOP-VSO-REFLOW.pdf and sot487-1_po.pdf HTSSOP, 38 Pin (http://www.ti.com/lit/ds/symlink/tlc5951.pdf#page=47&zoom=140,-67,15), generated with kicad-footprint-generator Soldered wire connection with feed through strain relief, for 2 times 1 mm² wire, reinforced insulation, conductor diameter 2.4mm, see , script-generated with , script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_WAGO THT Terminal Block Phoenix PT-1,5-8-3.5-H pitch 3.5mm size 35.7x7mm^2 drill 1.2mm pad 2.4mm Terminal Block Phoenix PTSM-0,5-2-2.5-H-THR, 2 pins, diameter 1.8mm size 1.8x2.4mm^2 z-position of LED center 1.6mm 2 pins diameter 5.0mm THT rectangular pad as test point, loop diameter2.6mm, hole diameter 1.3mm, hole diameter 1.3mm, wire diameter 1.0mm test point SMD pad as test point, loop diameter2.548mm, hole diameter 1.2mm THT rectangular pad as test Point, diameter 2.0mm SMD pad rectangle square THT rectangular pad as test Point, square 1.0mm side length SMD rectangular pad as test Point, square 2.5mm side length SMD rectangular pad as test point, loop diameter 1.8mm, 2 pins LED, diameter 5.0mm, 3 pins, pitch 5mm, size 20x9.8mm^2, drill diamater 1.2mm, pad diameter 2.2mm, see http://www.mouser.com/ds/2/324/ItemDetail_1725672-916605.pdf, script-generated using https://github.com/pointhi/kicad-footprint-generator/scripts/TerminalBlock_RND THT terminal block RND 205-00067, 2 pins, diameter 3.0mm z-position of LED center 2.0mm 2 pins diameter 10.0mm Neosid SD12k style3 Inductor, Radial series, Radial, pin pitch=7.50mm, , length*width=9*4.0mm^2, Capacitor, https://en.tdk.eu/inf/20/20/db/fc_2009/MKT_B32560_564.pdf C Rect series Radial pin pitch 15.24mm length 11mm diameter 4.5mm Tantal Electrolytic Capacitor CP, Axial series, Axial, Horizontal, pin pitch=20.3mm, 5W, length*width=21.3*4.8mm^2, https://www.bourns.com/pdfs/PWR4412-2S.pdf Resistor Bare_Metal_Element series Bare Metal Strip/Wire, Horizontal, pin pitch=60mm, , length*diameter=55*23.0mm^2, Electrolytic Capacitor, , http://www.vishay.com/docs/28342/058059pll-si.pdf CP Radial series Radial pin pitch 2.54mm length 7mm width 2.5mm Capacitor C, Rect series, Radial, pin pitch=5.00mm, diameter=19mm, Supercapacitor, http://www.elna.co.jp/en/capacitor/double_layer/catalog/pdf/dx_e.pdf CP.

New Pull Request

Labels Milestones